Buy SunTouch Floors

Double sided super-sticky tape 3/4″ wide x 108 feet long very thin and low profile to adhere your WarmWire Strap to the sub floor. It works on concrete, plywood or concrete board to hold the mat in place while you trowel over it.

The Mat Installation Kit contains everything you need to install your SunTouch Floor Warming project quickly. We recommend purchasing the installation kit if you are a first time installer. 1 Kit will cover the installation of up to 150 Sq Feet.

Included in the kit:

• a DVD completely detailing installation in both English & Spanish versions
• Installation manual
• 1 Roll Super-sticky double backed tape to secure mat to the subfloor (A 108 Ft roll will typically secure up to 150 SF of Mat)
• 50 Wire Clips for securing the blue wire, if you choose to separate it from the mats, to the subfloor
• BONUS info from Warm Your Floor: a 6 page color article with step-by-step instructions
• Tips & Tricks sheet to make your install smooth
• Job site signs
• And more! Only from Warm Your Floor

-

The SunTouch LoudMouth Monitor sounds an alarm if the SunTouch Heating Wire is cut or damaged, allowing for easy repair BEFORE the mat is covered with Mortar & Tile. We highly recommend the LoudMouth® invented and patented by SunTouch.

Connect it during the ENTIRE installation of your SunTouch Mats to monitor the Heating Elements and give yourself the assurance of a Quality Installation. The LoudMouth Monitor is Another SunTouch innovation – Our design is unique and has more features than recent imitators.

1. Insert each lead wire from the heating product into L1 and L2 terminals (no polarity) with the ground wire inserted into the G terminal. Tighten the terminal screws onto the wires.
2. Set switch to ON position.
3. Green light indicates the LoudMouth is operating.
4. The red light and alarm indicate lead wires have come loose from terminals or damage has occurred to the heating product.
5. Press the TEST button to simulate a damage condition before beginning work

Of course, you can also monitor the installation with only your digital multi meter to verify resistance (ohms); but you will have to watch it throughout the install, checking it frequently. The Loudmouth is nicknamed “the Screamer” and is optional, but provides peace of mind during the installation process or between the installation of the Mats and the Tile (if there is a time gap between when the mats are laid out unprotected and covering them with mortar) Features:

1. A very Loud Alarm Simple operation with an On/Off Switch and a TEST button
2. 9V battery operated (included)
3. A green light to indicate GO and a Red light to indicate STOP, there’s damage – Fix it now.
4. Screwdriver included for attaching mat leads 1 LoudMouth can be used to monitor up to 3 mats at once.

** Important – a Multi Meter to measure OHMS is still required to test resistance before, during, and after installation. The Loudmouth DOES NOT replace the use of an Ohm meter – it’s just another SunTouch Innovation to help your installation go smoothly.