• 120010WD WarmWire Floor Heating Wire Spool 47 Ft long with 10 ft Armored power lead
• SunStat PRO Thermostat Model 500670 with dual Voltage, Built-in GFCI protection, and Preset or Custom programming. LCD Backlit display and 15 Ft floor sensor wire included
• LoudMouth installation monitor for an audible warning if continuity is broken during installation simply connect the included 9-volt battery. Designed & patented by SunTouch contractors call this handy tool peace of mind
• 1 Coil of WarmWire Strap
• Double sided super-sticky tape 3/4″ wide x 108 feet long very thin and low profile to adhere your WarmWire Strap to the sub floor. It works on concrete, plywood or concrete board to hold the mat in place while you trowel over it.
• Installation Manual with all instructions, suggestions and examples of floor heating layouts
• Bilingual Installation DVD showing the entire installation process for your floor heating mat

And, Only from Warm Your Floor, we include:

• Digital Ohm Meter for testing of your mats before, during and after installation complete with 9 volt battery
• Suntouch Tips & tricks secrets from experienced installers gathered over many years

SunTouch Radiant Floor Heating Mats are the safest & easiest way to keep warm and enjoy comfortable walking surfaces. And they are the easiest Electric Radiant heat mats to install in the Industry. 1/8 inch thin, SunTouch in floor heat mats are UL Listed for the U.S.A. and Canada in both 120V and 240V and have a 10-foot armored and fully grounded 3-wire power lead.
SunTouch is the ONLY system Tested by the Tile Council of America and declared suitable for ALL residential and most commercial applications; TCA is an Independent association. SunTouch has NO “return wire” at the end of the mat like our competitors. The Open Mesh construction of the orange mat that carries the blue heating wires allows direct attachment to the subfloor and thinset to flow through and around the mat and which allows the tile to mechanically bond to the subfloor. This allows an Easy 1-step Installation over most Sub Floors.

• 12000524 SunTouch Floor Heating Mat 2 x 5 Ft with 10 Ft Armored power lead
• SunStat PRO Thermostat Model 500670 with dual Voltage, Built-in GFCI protection, and Preset or Custom programming. LCD Backlit display and 15 Ft floor sensor wire included
• LoudMouth installation monitor for an audible warning if continuity is broken during installation simply connect the included 9-volt battery. Designed & patented by SunTouch contractors call this handy tool peace of mind
• Double sided super-sticky tape wide x 108 feet long very thin and low profile to adhere your mat to the floor it works on concrete, plywood or concrete board to hold the mat in place while you trowel over it.
• Installation Manual with all instructions, suggestions and examples of floor heating layouts
• Bilingual Installation DVD showing the entire installation process for your floor heating mat

And, Only from Warm Your Floor, we include:

• Digital Ohm Meter for testing of your mats before, during and after installation complete with 9 volt battery
• Suntouch Tips & tricks secrets from experienced installers gathered over many years

-

Included in the kit:

• a DVD completely detailing installation in both English & Spanish versions
• Installation manual
• 1 Roll Super-sticky double backed tape to secure mat to the subfloor (A 108 Ft roll will typically secure up to 150 SF of Mat)
• 50 Wire Clips for securing the blue wire, if you choose to separate it from the mats, to the subfloor
• BONUS info from Warm Your Floor: a 6 page color article with step-by-step instructions
• Tips & Tricks sheet to make your install smooth
• Job site signs
• And more! Only from Warm Your Floor

-

Connect it during the ENTIRE installation of your SunTouch Mats to monitor the Heating Elements and give yourself the assurance of a Quality Installation. The LoudMouth Monitor is Another SunTouch innovation – Our design is unique and has more features than recent imitators.

1. Insert each lead wire from the heating product into L1 and L2 terminals (no polarity) with the ground wire inserted into the G terminal. Tighten the terminal screws onto the wires.
2. Set switch to ON position.
3. Green light indicates the LoudMouth is operating.
4. The red light and alarm indicate lead wires have come loose from terminals or damage has occurred to the heating product.
5. Press the TEST button to simulate a damage condition before beginning work

Of course, you can also monitor the installation with only your digital multi meter to verify resistance (ohms); but you will have to watch it throughout the install, checking it frequently. The Loudmouth is nicknamed “the Screamer” and is optional, but provides peace of mind during the installation process or between the installation of the Mats and the Tile (if there is a time gap between when the mats are laid out unprotected and covering them with mortar) Features:

1. A very Loud Alarm Simple operation with an On/Off Switch and a TEST button
2. 9V battery operated (included)
3. A green light to indicate GO and a Red light to indicate STOP, there’s damage – Fix it now.
4. Screwdriver included for attaching mat leads 1 LoudMouth can be used to monitor up to 3 mats at once.

** Important – a Multi Meter to measure OHMS is still required to test resistance before, during, and after installation. The Loudmouth DOES NOT replace the use of an Ohm meter – it’s just another SunTouch Innovation to help your installation go smoothly.

The CableTrowel has been thoroughly tested by professional tile installers and the results are in:

• This new tool works faster
• The CableTrowel is easier to clean than other trowels
• And it cannot damage the heating wire.

Experienced tile installers know that metal trowels can become razor sharp over time and those edges are a danger to electric heating cables. The CableTrowel blade is made of durable ABS plastic so it is safer to use around heating elements.

The NEW Suntouch CableTrowel is lightweight, but tough enough for commercial use.

Make your electric radiant installation faster and easier – use the CableTrowel

• The CableTrowel Will NOT damage the electric radiant heating wire or your hands! No sharp edges means no cuts in wire or you!
• The CableTrowel has a 3/8 x 3/8 notch size is suitable for larger tiles.
• It is Lighter and easier to use than the typical trowel
• Quick Clean up since mortar washes off easily and the CableTrowel will never rust.

All these features and it costs less than $13 !